Struct actix_web::http::StatusCode [−][src]
pub struct StatusCode(_);
Expand description
An HTTP status code (status-code
in RFC 7230 et al.).
Constants are provided for known status codes, including those in the IANA HTTP Status Code Registry.
Status code values in the range 100-999 (inclusive) are supported by this
type. Values in the range 100-599 are semantically classified by the most
significant digit. See StatusCode::is_success
, etc. Values above 599
are unclassified but allowed for legacy compatibility, though their use is
discouraged. Applications may interpret such values as protocol errors.
Examples
use http::StatusCode;
assert_eq!(StatusCode::from_u16(200).unwrap(), StatusCode::OK);
assert_eq!(StatusCode::NOT_FOUND.as_u16(), 404);
assert!(StatusCode::OK.is_success());
Implementations
Converts a u16 to a status code.
The function validates the correctness of the supplied u16. It must be greater or equal to 100 and less than 1000.
Example
use http::StatusCode;
let ok = StatusCode::from_u16(200).unwrap();
assert_eq!(ok, StatusCode::OK);
let err = StatusCode::from_u16(99);
assert!(err.is_err());
Converts a &u8 to a status code
Returns the u16
corresponding to this StatusCode
.
Note
This is the same as the From<StatusCode>
implementation, but
included as an inherent method because that implementation doesn’t
appear in rustdocs, as well as a way to force the type instead of
relying on inference.
Example
let status = http::StatusCode::OK;
assert_eq!(status.as_u16(), 200);
Returns a &str representation of the StatusCode
The return value only includes a numerical representation of the status code. The canonical reason is not included.
Example
let status = http::StatusCode::OK;
assert_eq!(status.as_str(), "200");
Get the standardised reason-phrase
for this status code.
This is mostly here for servers writing responses, but could potentially have application at other times.
The reason phrase is defined as being exclusively for human readers. You should avoid deriving any meaning from it at all costs.
Bear in mind also that in HTTP/2.0 and HTTP/3.0 the reason phrase is abolished from transmission, and so this canonical reason phrase really is the only reason phrase you’ll find.
Example
let status = http::StatusCode::OK;
assert_eq!(status.canonical_reason(), Some("OK"));
Check if status is within 100-199.
Check if status is within 200-299.
Check if status is within 300-399.
Check if status is within 400-499.
Check if status is within 500-599.
100 Continue [RFC7231, Section 6.2.1]
101 Switching Protocols [RFC7231, Section 6.2.2]
102 Processing [RFC2518]
200 OK [RFC7231, Section 6.3.1]
201 Created [RFC7231, Section 6.3.2]
202 Accepted [RFC7231, Section 6.3.3]
203 Non-Authoritative Information [RFC7231, Section 6.3.4]
204 No Content [RFC7231, Section 6.3.5]
205 Reset Content [RFC7231, Section 6.3.6]
206 Partial Content [RFC7233, Section 4.1]
207 Multi-Status [RFC4918]
208 Already Reported [RFC5842]
226 IM Used [RFC3229]
300 Multiple Choices [RFC7231, Section 6.4.1]
301 Moved Permanently [RFC7231, Section 6.4.2]
302 Found [RFC7231, Section 6.4.3]
303 See Other [RFC7231, Section 6.4.4]
304 Not Modified [RFC7232, Section 4.1]
305 Use Proxy [RFC7231, Section 6.4.5]
307 Temporary Redirect [RFC7231, Section 6.4.7]
308 Permanent Redirect [RFC7238]
400 Bad Request [RFC7231, Section 6.5.1]
401 Unauthorized [RFC7235, Section 3.1]
402 Payment Required [RFC7231, Section 6.5.2]
403 Forbidden [RFC7231, Section 6.5.3]
404 Not Found [RFC7231, Section 6.5.4]
405 Method Not Allowed [RFC7231, Section 6.5.5]
406 Not Acceptable [RFC7231, Section 6.5.6]
407 Proxy Authentication Required [RFC7235, Section 3.2]
408 Request Timeout [RFC7231, Section 6.5.7]
409 Conflict [RFC7231, Section 6.5.8]
410 Gone [RFC7231, Section 6.5.9]
411 Length Required [RFC7231, Section 6.5.10]
412 Precondition Failed [RFC7232, Section 4.2]
413 Payload Too Large [RFC7231, Section 6.5.11]
414 URI Too Long [RFC7231, Section 6.5.12]
415 Unsupported Media Type [RFC7231, Section 6.5.13]
416 Range Not Satisfiable [RFC7233, Section 4.4]
417 Expectation Failed [RFC7231, Section 6.5.14]
418 I’m a teapot [curiously not registered by IANA but RFC2324]
421 Misdirected Request RFC7540, Section 9.1.2
422 Unprocessable Entity [RFC4918]
423 Locked [RFC4918]
424 Failed Dependency [RFC4918]
426 Upgrade Required [RFC7231, Section 6.5.15]
428 Precondition Required [RFC6585]
429 Too Many Requests [RFC6585]
431 Request Header Fields Too Large [RFC6585]
451 Unavailable For Legal Reasons [RFC7725]
500 Internal Server Error [RFC7231, Section 6.6.1]
501 Not Implemented [RFC7231, Section 6.6.2]
502 Bad Gateway [RFC7231, Section 6.6.3]
503 Service Unavailable [RFC7231, Section 6.6.4]
504 Gateway Timeout [RFC7231, Section 6.6.5]
505 HTTP Version Not Supported [RFC7231, Section 6.6.6]
506 Variant Also Negotiates [RFC2295]
507 Insufficient Storage [RFC4918]
508 Loop Detected [RFC5842]
510 Not Extended [RFC2774]
511 Network Authentication Required [RFC6585]
Trait Implementations
Returns the “default value” for a type. Read more
Formats the status code, including the canonical reason.
Example
assert_eq!(format!("{}", StatusCode::OK), "200 OK");
Performs the conversion.
Performs the conversion.
type Err = InvalidStatusCode
type Err = InvalidStatusCode
The associated error which can be returned from parsing.
Parses a string s
to return a value of this type. Read more
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
This method tests for !=
.
This method returns an ordering between self
and other
values if one exists. Read more
This method tests less than (for self
and other
) and is used by the <
operator. Read more
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
type Error = InvalidStatusCode
type Error = InvalidStatusCode
The type returned in the event of a conversion error.
type Error = InvalidStatusCode
type Error = InvalidStatusCode
The type returned in the event of a conversion error.
Performs the conversion.
type Error = InvalidStatusCode
type Error = InvalidStatusCode
The type returned in the event of a conversion error.
Performs the conversion.
Auto Trait Implementations
impl RefUnwindSafe for StatusCode
impl Send for StatusCode
impl Sync for StatusCode
impl Unpin for StatusCode
impl UnwindSafe for StatusCode
Blanket Implementations
Mutably borrows from an owned value. Read more
Compare self to key
and return true
if they are equal.
Instruments this type with the provided Span
, returning an
Instrumented
wrapper. Read more
Instruments this type with the provided Span
, returning an
Instrumented
wrapper. Read more
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more